2927 WETMORE AVE 2018-02-12 - Laserfiche WebLink

• a. The code analysis on the drawings should be revised to show a maximum of 49 persons instead of 65. 4. The drawings should indicate specific signage at the main entrance door and the rear exit door to indicate that these doors will be open during business hours, per IBC section 1010.1.9.3, 2.2. Construction 1. Please provide details of the new ceiling in the prep area. The ceiling details should be shown on the drawings, and in section should show a 2 inch angle at the wall, per the Northwest Ceiling Bureau details on document 401. 2. Safety glazing should be shown on all door and window elevations as required by IBC section 2406.4. 3. Please indicate wall and ceiling sections for the new walls, and target those sections to the plans. This information should show if the walls are floor to underside of structure, or a different configuration. 4. Please confirm if doors 3, 4, and 5 are existing or new doors. 5. Please indicate safety glazing on the schedules for door 1 and window 2. Accessibility 1. The sales and service counter, cabinet niche for water service, and bus station should be shown in section and elevation to meet accessibility requirements of ICC-A117.1-2009 Chapters 9 for service counters and section 309 for reach ranges. 2. The toilet paper dispensers should be shown on the toilet room elevations to meet the requirements of ICC-A117.1-2009 section 604.7. 3. Door hardware should be shown to be accessible on the door schedule, for both new and existing doors. 4. Please show the clear floor space per section 305.3 beyond the arc of the door, in addition to the 5'turning space, per ICC-A117.1-2009 section 603.2.2, exception 2. Energy 1. Please include a calculated lighting summary from the forms available on NEEC.NET to verify compliance for the interior lighting power allowances per WSEC table C405.2 (1). Mechanical (Deferred submittal) 1. A change in occupancy to A-2 requires full compliance with the IMC, per IMC section 102.5. 2. The new prep area requires mechanical ventilation, per IMC section 401.2, as amended by the State of Washington. 3. A Type II hood should be shown above the dishwasher in the coffee bar, per IMC section 507.3. 4. The drawings should indicate how the ventilation will occur, per IMC section 403.1, 403.3.1.1 and WSEC C103.2 item 4. a. The existing in-line heater shown above the ceiling in the new prep area should be shown to meet the requirements of the WSEC C403. How is the heat transferred through the ceiling to the prep area? Please identify the fuel source for this heater. 5. Please indicate the current mechanical system locations and cfm for the coffee shop and toilet rooms, per IMC Table 403.3.1.1 requirements for Food and Beverage Service and requirements for Public Spaces Public Toilet rooms. 6. A commercial kitchen plumbing permit application is required. CITY OF EVERETT PERMIT SERVICES 3200 CEDAR ST, EVERETT, WA 98201 425-257-8810 website: www.everettwa.qov/permit January 24, 2017 email: everetteps©everettwa.qov f