Laserfiche WebLink
1 <br />40-27 BUILDING <br />BRPH ARCHITECTS -ENGINEERS, INC. <br />INTERIOR ARCHITECTURAL WOODWORK <br />B. Field Measurements: Where woodwork is indicated to fit to other construction, verify <br />dimensions of other construction by field measurements before fabrication, and <br />indicate measurements on Shop Drawings. Coordinate fabrication schedule with <br />construction progress to avoid delaying the Work. <br />1. Locate concealed framing, blocking, and reinforcements that support woodwork <br />by field measurements before being enclosed, and indicate measurements on <br />Shop Drawings. <br />2. Established Dimensions: Where field measurements cannot be made without <br />delaying the Work, establish dimensions and proceed with fabricating woodwork <br />without field measurements. Provide allowance for trimming at site, and <br />coordinate construction to ensure that actual dimensions correspond to <br />established dimensions. <br />1.8 COORDINATION <br />A. Coordinate sizes and locations of framing, blocking, furring, reinforcements, and other <br />related units of Work specified in other Sections to ensure that interior architectural <br />woodwork can be supported and installed as indicated. <br />B. Hardware Coordination: Distribute copies of approved schedule for cabinet hardware <br />specified in "Cabinet Hardware Schedule" in Part 2, to fabricator of architectural <br />woodwork; coordinate cabinet shop drawings and fabrication with hardware <br />requirements. <br />IPART 2 - PRODUCTS <br />2.1 MATERIALS <br />A. General: Provide materials that comply with requirements of AWI's and/or WI's quality <br />standard for each type of woodwork and quality grade specified, unless otherwise <br />indicated. <br />B. Wood Products: Comply with the following: <br />1. Hardboard: AHA A135.4. <br />2. Medium -Density Fiberboard: ANSI A208.2, Grade MD, made with binder <br />containing no urea formaldehyde. <br />3. Particleboard: ANSI A208.1, Grade M-2-Exterior Glue. <br />4. Softwood Plywood: DOC PS 1. <br />5. Hardwood Plywood: HPVA HP-1, made with adhesive containing no urea <br />formaldehyde. <br />C. High -Pressure Decorative Laminate: NEMA LD 3 or as required by woodwork quality <br />standard. <br />Manufacturer: Subject to compliance with requirements, provide high-pressure <br />decorative laminates by: <br />a. Wilsonart, PL-1. <br />C06922.001.00 <br />064023-3 <br />05-22-14 <br />