Laserfiche WebLink
40-27 BUILDING INTERIOR ARCHITECTURAL WOODWORK <br />BRPH ARCHITECTS -ENGINEERS, INC. <br />2.2 CABINET HARDWARE AND ACCESSORIES <br />A. General: Provide cabinet hardware and accessory materials associated with <br />architectural cabinets, except for items specified in Division 8. <br />B. Cabinet Hardware and Accessory Schedule: <br />1. For Each Door Leaf: <br />a. 1 Pair Hinges* Frameless concealed hinges <br />b. 1 Pull <br />C. 1 Lock (if shown) SCHLAGE <br />(European Type) BHMA A156-9, <br />B01602 with 135 degree swing <br />and be self -closing. Each door <br />will have a bumper to prevent <br />laminate -to -laminate contact. <br />See CP-1 on finish legend <br />drawing. <br />CL1000 and CL2000 cabinet <br />locks with satin chrome finish. <br />d. 1 Catch (inactive Ball friction catches, BHMA <br />leaf of locked pair) A156-9, B03013. <br />Chain bolts shall be three inches long, shall have an 18-inch pull and angle strike <br />to secure inactive door on cabinets over 72 inches in height and be satin chrome <br />finish. Elbow catches shall be used on inactive doors up to and including 72 <br />inches in height and shall be satin chrome finish. <br />* The number of hinges per door shall be as follows: <br />Door Height Hinges per Door <br />00" — 36" 2 <br />37" — 62" 3 <br />63" — 80" 4 <br />2. NOTE: At door pairs, the active leaf is to be locked while the inactive leaf is to <br />have a trigger type latch. <br />C06922.001.00 06 40 23 - 4 <br />05-22-14 <br />