Laserfiche WebLink
40-27 BUILDING <br />FORMED METAL WALL PANELS <br />BRPH ARCHITECTS -ENGINEERS, INC. <br />C. Cracking, checking, peeling, or failure of paint to adhere to bare metal. <br />2. Finish Warranty Period: 20 years from date of Substantial Completion. <br />PART 2 - PRODUCTS <br />2.1 PERFORMANCE REQUIREMENTS <br />A. Structural Performance: Provide metal panel systems capable of withstanding the <br />effects of the following loads, based on testing according to ASTM E 1592: <br />1. Wind Loads: As indicated on Structural Drawings. <br />2. Deflection Limits: For wind loads, no greater than 1/180 of the span. <br />2.2 <br />2.3 <br />A. <br />0 <br />CONCEALED -FASTENER, SINGLE -SKIN METAL WALL PANELS (Drawing <br />Designation MP-1) <br />Basis -of -Design: BR5-36 exposed fastener panel by CENTRIA. <br />Wall Panel Description: <br />1. Material: Galvanized Steel (G90) <br />2. Panel Width: 36 inches. <br />3. Profile: Uniform ribs, 1-1/2 inch deep at 7.2 inches on center. <br />4. Panel thickness: 7/8 thick. <br />5. Panel joint: Overlap. <br />6. Texture: Smooth <br />ACCESSORIES <br />Wall panel accessories: Provide accessories as required for a complete installation. <br />Accessories shall be as indicated on approved shop drawings and per manufacturer's <br />approved standard details. Match material and finish of metal wall panels. <br />1. Closure Strips: <br />a. Metal Profile Closure Strips: Shall be fabricated from same gauge, <br />material and finish as metal panel. <br />1. Fabricate trim from same material and material thickness as wall panels. Finish <br />to match metal wall panels. <br />2. Locations include, but are not limited to the following: Drips, sills, jambs, corners, <br />framed openings, parapet caps, reveals and fillers. <br />C06922.001.00 <br />074213-3 <br />05-22-14 <br />