1115 RAINIER AVE 2018-02-22 - Laserfiche WebLink

11116 ALARM COMMUNICATOI NFPA72 (2013ed) 26.6.3.3.2 COMPLIANCE (CON'T): 26.6.3.3.2.4—Transmission Channels: 26.6.3.3.2.4(d) If private signal transmission facilities are used, the equipment necessary to transmit signals shall also comply with the requirements for duplicate equipment or replacement of critical components as described in 26.6.4.2 26.6.3.3.2.4(d)—GSS Satisfaction:This requirement is met through UL testing of Guardian Security's Central Station. In addition, Guardian employs locally trained technicians,and has inventoried spare critical components on site. 26.6.3.3.2.4—Transmission Channels: 26.6.3.3.2.4(e) The system shall provide information that indicates the quality of the received signal for each RARSR supervising each RAT in accordance with 26.6.3.3.2 and shall provide information at the supervising station when such signal quality falls below the minimum signal quality levels set forth in 26.6.3.3.2 26.6.3.3.2.4(e)—GSS Satisfaction:As set forth in UL Listed proprietary software by the manufacturer, RARSR's are supervised for quality. If the RARSR's fall below UL approved levels(via proprietary software),Central Station is notified via the proprietary software. 26.6.3.3.2.4 —Transmission Channels: 26.6.3.3.2.4(f) Each RAT shall be installed in such a manner so as to provide a signal quality over at least two independent two-way RF transmission channels, of the minimum quality level specified, that satisfies the performance requirements in 26.6.2.4 and 26.6.4. 26.6.3.3.2.4(f)—GSS Satisfaction:The requirements of referenced code 26.6.2.4 and 26.6.4are met via: • Units demonstrate FCC compliance labeling • All units in Seattle and Bellingham are installed to NFPA70 compliance. • All antennas in Seattle and Bellingham utilize single point grounding for protection of the possibility of damage by lightning or static discharging. • The requirements of referenced code 26.6.4 are met through UL testing of Guardian Security's Central Station.