Laserfiche WebLink
5.3 Coatings <br /> All paintings shall be done in a workmanlike manner and the finished coating shall be free of dry <br /> spray, paint holidays, pinholes, bubbles, runs, drops, ridges, laps and variations in color,texture <br /> and gloss.All coats shall be applied in such a manner as to produce an even film of uniform <br /> thickness. Edges, corners,seams joints,welds, rivets, and surface irregularities shall receive <br /> special attention to insure adequate thickness of paint. Spray painting shall be supplemented <br /> with brush work where necessary to coat surfaces which may not be properly coated by <br /> spraying. <br /> Paints and protective coatings shall be applied only under temperature and atmospheric <br /> conditions favorable to drying and which preclude condensations on surfaces to be painted. <br /> Application of coatings when the surface temperature is less than 5 °F(3°C)above the dew <br /> point will not be accepted.Sufficient time shall elapse between the applications of successive <br /> coats to permit each coat to dry properly. <br /> 5.3.1 Designated Coating System (Supplier to be agreed before production) <br /> Process Paint Name DFT( µ) <br /> Exterior Surface Epoxy zinc rich primer 30 <br /> Epoxy primer 40 <br /> Polyurethane topcoat 40 <br /> Total : 110 <br /> Interior Surface Epoxy zinc rich primer 30 <br /> Polyamide epoxy 40 <br /> Total: 70 <br /> Final details to be agreed in accordance with Para. 3.5. <br /> 6.0 Markings <br /> Decal material is PVC film with permanent adhesive. <br /> PODS logo: one(1)Decal on each exterior side wall <br /> PODS packing instructions: one(1)Decal at each interior side wall <br /> Serial number: one(1)Decal at each end of the container <br /> Consolidate plate: one(1)at only front end of the container <br /> 7.0 Warranty <br /> The manufacturer shall warrant each container sub-assembly built for the following: <br /> 7.1 Structure <br /> All structural components, defects or omissions in construction, poor workmanship and/or <br /> defective material for a period of two (2)years. <br /> 7.2 Plywood <br /> All plywood for five(5)years. <br /> 7.3 Sub-surface <br /> Surface preparation, paint, primer application and protection for five (5)year. <br /> 7.4 PP Honeycomb Sheet <br /> All PP honeycomb sheet for five(5)years. <br /> pods containers seismic and combustibles.docx Page 16 of 19 <br />