Laserfiche WebLink
I <br /> r1 310W, and 400W. LED luminaires are required to be pre-approved in order to verify their <br /> 2 photometric output. To be considered for pre-approval, LED luminaires must meet the <br /> I 3 requirements of this section. <br /> 4 <br /> 5 LED luminaires shall include a removable access door, with tool-less entry, for access to <br /> 6 electronic components and the terminal block. The access door shall be removable, but <br /> I 7 include positive retention such that it can hang freely without disconnecting from the <br /> 8 luminaire housing. LED drivers may be mounted either to the interior of the luminaire <br /> 9 housing or to the removable door itself. <br /> I 10 <br /> 11 LED drivers shall be removable for user replacement. All internal modular components <br /> 12 shall be connected by means of mechanical plug and socket type quick disconnects. Wire <br /> 13 nuts may not be used for any purpose. All external electrical connections to the luminaire <br /> 14 shall be made through the terminal block. <br /> 15 <br /> I 16 LED luminaires shall include a 7-pin NEMA photocell receptacle. The LED driver(s) shall <br /> 17 be dimmable from ten volts to zero volts. LED output shall have a Correlated Color <br /> 18 Temperature (CCT) of 4000K nominal (4000-4300K) and a Color Rendering Index (CRI) <br /> I 19 of 70 or greater. LED output shall be a minimum of 85% at 75,000 hours at 25 degrees <br /> 20 Celsius. <br /> 21 <br /> 22 LED luminaires shall be available for 120V, 240V, and 480V supply voltages. Voltages <br /> I23 refer to the supply voltages to the luminaires present in the field. LED power usage shall <br /> 24 not exceed the following maximum values for the applicable wattage class: <br /> 25 <br /> IClass Max. Wattage <br /> 200W 110W <br /> 250W 165W <br /> I 310W 210W <br /> 400W 275W <br /> 26 <br /> I 27 Only one brand of LED conventional roadway luminaire may be used on a Contract. They <br /> 28 do not necessarily have to be the same brand as any high-mast, underdeck, or wall- <br /> 29 mount luminaires when those types of luminaires are specified in the Contract. LED <br /> I 30 luminaires shall include a standard 10 year manufacturer warranty. <br /> 31 <br /> 32 The list of pre-approved LED Conventional Roadway Luminaires is available at <br /> I 33 http://www.wsdot.wa.gov/Design/Traffic/ledluminaires.htm. <br /> 34 <br /> 35 9-29.10(2) Decorative Luminaires <br /> I 36 This section, including title, is revised to read: <br /> 37 <br /> 38 9-29.10(2) Vacant <br /> 49 <br /> I40 9-29.12 Electrical Splice Materials <br /> 41 This section is supplemented with the following new subsections: <br /> 42 <br /> I <br /> I <br />