11831 AIRPORT RD WHOLE SITE FILE 2020-01-21

8. Furniture: one desk with chair, one standing plan table with drafting stool, a two- drawer file cabinet, one four(4)foot by eight(8) foot conference table with four(4) chairs, one wall mounted dry erase board, and six square feet of shelving. 9. Sanitary facilities within the immediate area. The Weekly Project Meeting Space shall be: 1. Dimensions: Approximately 20' interior box length, 8' interior box width, 7' interior ceiling. 2. Interior: paneled walls, finished ceiling, and vinyl or tile floors. 3. Exterior: weather-tight with insulated roof, walls, and floor. Building shall be well supported with elevating jacks to level and stabilize building. 4. Electric: ceiling lights to provide adequate light levels for reading, a minimum of two (2) 110V duplex receptacles, and breaker panel. 5. Window, Door, and Steps: one operative window with security bars or similar theft deterrent covering, one standard exterior man door with cylinder door lock and six keys, and exterior steps for door access, if applicable. 6. Heating and Air Conditioning:AC with baseboard heat or similar equipment with adequate capacity to maintain typical in-door office temperatures. 7. Furniture: Two three (3) foot by six(6) foot conference tables, large dry erase board mounted on the wall, and ten chairs. The building shall remain the property of the Contractor and removed from the site upon physical completion of the contract, or when designated by the Engineer. Payment will be made in accordance with Section 1-04.1, for the following bid item: "Field Office", lump sum. The lump sum contract price for "Field Office" shall be full pay for furnishing, installing, maintaining, and removing the facility, including all costs associated with all required utility hook-ups and disconnects, and monthly utility charges for all utilities. Add the following new section: 1-05.21 Project Signage NEW Contractor shall furnish, install, and maintain; and remove and dispose of two (2) Project Signs as follows: • One Project Sign to be located southbound along the corridor and one Project Sign to be located northbound along the corridor and be visible from the travel lanes, at locations to be determined by Community Transit and the Contractor. The Contractor may need to move the Signs as construction progresses. • Each Sign shall be made of a durable material and constructed to last for the duration of the construction project. If the Project Sign becomes unreadable or is defaced or damaged, the Contractor shall replace the Project Sign in a timely manner. • Each Project Sign shall be approximately four (4) feet by eight (8) feet. The bottom of the Project Sign shall be approximately four (4) feet above the ground. Swift Green Line—Corridor Stations Special Provisions SP29 May 2017