1502 SE EVERETT MALL WAY FLOOR AND DECOR 2019-06-24

Plan Review No.:b1801-024 Page 2 of 3 4. The portion of the new exterior pedestrian ramp (Exit C) that is greater than 30 inches above adjacent grade, or other parts of the ramp should be provided with a guard in compliance with Section 1015. Response: Revised sheet(s): Delta 1 A101 Revised to show guard rail requirement. A303 Revised to show guard rail requirement. 5. The handrails for the new exterior pedestrian ramp (Exit C) should both continue past the edge of the ramp for a minimum of 12 inches at the lowest landing. Section 1014.6 Response: Revised sheet(s): Delta 1 A101 Revised to show guard rail requirement. A303 Revised to show guard rail requirement. 6. The capacity of Exit C is limited by the width of the ramp (5'-4"). The calculations on Sheet G001 should be revised to show 64"vs 92" (overall exit width still fine however). Section 1005.3.2 Response: Revised sheet(s): Delta 1 G001 Exit width and calculations revised to comply. Additional changes have occurred due to coordination between the trades. Sheet A401 Wall Sections: 1. Revised sections 1,2 and 3 to match structural brace framing for the raised parapets. 2. Added louvered vents to provide venting in the enclosed space created by the brace framing assembly. Sheet A403 Wall Sections: 1. Revised sections 3 and 4 to match structural brace framing for the raised parapets. 2. Added louvered vents to provide venting in the enclosed space created by the brace framing assembly. Sheet A404 Wall Sections: 1. Revised sections 1 and 3 to match structural brace framing for the raised parapets. 2. Added louvered vents to provide venting in he enclosed space created by the brace framing assembly. �- / 3 SRA-Stewart Reindersma Architecture,pllc 5450 E.High Street,Phoenix,Arizona 85054 t:(480)515-5123 f:(602)513-7193