Ordinance 4157 - Laserfiche WebLink

• that residential streets shall be paved to a minimum width of 36 feet curb to curb. (Permanent dead-end streets may be 32 feet curb to curb. ) When a proposed plat is located abutting an existing street right- of•way of lesser width than set forth in the above-mentioned design standards, the developer will be required to deed additional right-of-way for the existing street. 2. Alleys or easements shall be provided along rear and/or side lot lines as required. Alleys shall have a minimum total width of 24 feet. Easements shall have a minimum total width of 10 feet. Easements of the same or greater width may be required along the lines of or across lots, where necessary for the extension of existing or planned utilities. No permanent structure or building may be erected on an easement. 3. At street intersections in residential areas, property line corners shall be rounded by an arc, the minimum radius of which shall be ten feet, 4. Street pavement centerlines shall coincide with right-of-way centerlines. Lots 1. Every lot in the subdivision shall abut on a street; 2. Lots shall be a minimum of 80 feet in depth; 3. Lot dimensions shall conform to the requirements of the zoning ordinance; 4. Corner lots for residential use shall have extra width to permit appropriate building setback from and orientation to both streets; 5. Lots having frontage on two streets shall be avoided wherever possible; 6. Residential lots fronting on community arterials shall be at least 120 feet in depth; 7. Side lot lines shall be within 20 degrees of perpendicular to the centerline of the street on which the lot faces; 8. Interior lot lines shall be straight, or composed of straight line elements; 9. Corner lots shall be graded to provide sufficient sight clearance at intersections. (8)