Ordinance 4074 - Laserfiche WebLink

• sewers by rodding for the removal of obstructions in the side sewer line when the same can be removed through a cleanout installed for that purpose, must furnish the legal description of the property on which the work is to be done, must state the location of the sewer, name of the owner of the premises, the number and location of buildings to be connected and must be accompanied by a permit fee in accordance with the following schedule: Initial connection to public sewer $10.00 Catch basins 10.00 Repairs to side sewers or laterals 2.50 Altering existing side sewers or laterals 2 .50 Installation of drains and/or sumps 2.50 Capping sewers 2.50 Permits issued for the above listed side sewer and/or drain work shall expire and become null and void thixty y (60) days from date thereof unless a reasonable extension of time is granted by the City Engineer. Permit shall be posted at the job on which the work is in progress. All persons desiring to connect a private sewer to a pub- lic sewer to serve property which has not been charged with the costs of a local sewer by local improvement district assessment, or otherwise shall pay, in addition to the pay- ment of the $10 initial connection fee above provided, any connection charge required by ordinance of the City of Everett . Section 6: That Section 2.20. 150 be and the same is hereby amended to read as follows: 2.20. 150 Location , construction and inspection. All side sewers running from the main sewer to all buildings, lands or premises shall not be less than 30" from any foun- dation wall of any building and if there be no foundation wall , not less than 30" from the outer lines of any footings, pilings or building supports. All side sewers shall have not less than 60" of cover at the curb line, or in a public alley, 30" of cover at the property line, and 18" of cover on the private property. No side sewer which is laid generally parallel to the curb or curb line shall have less than 48" of cover between the curb or curb line, and the sidewalk or sidewalk line , or less than 30" of cover between the sidewalk or sidewalk line and the property line. All cover measurements shall be based on the established grade or on existing improve- ments or shall be approved by the City Engineer. Sewer pipes in public areas shall be not less than 6" in diameter and shall be laid on a slope of not less than 1/8" per foot . Sewer pipes in private areas shall not be less than 4" in diameter and shall be laid on a slope of not less than 1/4" per foot . Side sewers or private sewer lines connected to the public sewer system shall not be cut adrift nor abandoned without capping at the property line or as directed by the Inspector of Sewers and Rumb i ng. - 4 -