6300 GLENWOOD AVE 2020-06-17 - Laserfiche WebLink

Y Section 2.2 Asbestos Survey Narrative (Batch Mixing Plant) South Everett CADMAN Plant I 6300 Glenwood Ave. I Everett, WA 98203 Bulk samples collected were submitted for sample analysis in accordance with method EPA-600/R-93/116: "Method for the Determination of Asbestos in Bulk Building Materials". Analyses were performed in Pacific Rim Environmental Inc.'s NVLAP Accredited Laboratory(Lab Code 101631-0). Materials are positive for asbestos if they are found to contain greater than 1%or 1%asbestos. A total of three(3)samples were collected and submitted for PLM laboratory analysis. One (01)of these samples was found to contain greater than 1%asbestos. Thermal Systems Insulation(TSI) Suspect asbestos-containing boiler tank insulation was identified inside of boiler rooms#1 and#2.The materials were sampled and no asbestos was detected. (Samples#42, 52) If during the course of wall, ceiling or floor demolition, any TSI materials that are not listed in this report are uncovered, sampling must be performed prior to disturbing these materials, Surfacing Materials No suspect asbestos-containing surfacing materials were identified at the subject structure, If during the course of wall,ceiling or floor demolition,any surfacing materials not identified in this report are uncovered, sampling must be performed prior to disturbing these materials. Miscellaneous Materials Suspect asbestos-containing pipe gaskets were identified inside of boiler room #1. The material was sampled and found to contain 40-45%Chrysotile asbestos, (Sample#41) If during the course of wall, ceiling or floor demolition, any miscellaneous materials that are not listed in this report are uncovered,sampling mat be performed prior to disturbing these materials. PacRim#16467 Page 6 This report shall not be reproduced,except in full,without written permission from Pacific Rim Environmental,Inc.