8615 7TH AVE SE 2021-02-26 - Laserfiche WebLink

The wheel chair lift does not provide access through the fire wall. Access to and from the wheelchair lift is through door 115A, which is listed as a 90- minute fire rated door on the door schedule on sheet A9.1 . 5) The glazed openings within the fire wall as shown on the north elevation require 90-minute fire-resistive protection. Sheet A1.3 - Add keynote 1 .3 "EXISTING WINDOW TO BE REMOVED. INFILL OPENING WITH BRICK TO MATCH EXISTING." Sheet A4.1 - Add keynote 4.11 "EXISTING WINDOW TO BE REMOVED. INFILL OPENING WITH BRICK TO MATCH EXISTING." 6) As the fire wall turns north from Grid line B to Grid Line 8 it should continue vertically until the edge of the eave over hang. See exceptions in Section 706.5.2. Sheet A1.1 - Add wall type D6 callout. - Add dimension to read " EXTENT OF 2HR BRICK VENEER" Sheet A8.0 - Add wall type D6 - 2HR BRICK VENEER Egress: 1 ) The location and nomenclature of the maximum occupant load signs for the assembly spaces should be shown on the plans. Section 1004.3. Sheet G1.1 - Add note - "MAXIMUM OCCUPANT LOAD SIGN PER IBC SECTION 1004.3. SIGN TO READ "NOTICE FOR YOUR SAFETY OCCUPANCY IS LIMITED TO 890 PERSONS BY ORDER OF THE CODE OFFICIAL. KEEP POSTED UNDER PENALTY OF LAW."" 2) A sign stating Exit in raised characters and braille and complying with ICC Al 17.1 should be shown adjacent to the exterior exit doorways. Section 1013.4. Sheet G1 .1 - Add note "EXIT SIGN W/ RAISED CHARACTERS AND BRAILLE PER IBC SECTION 1013.4 AND ICC A117.1 ." 3) All of the exit doors should be shown with panic hardware on the door schedule. Sheet A9.1 - Add note in remarks column of door schedule for doors 101 B, 101 C, 111C, 111 D, 121A, to read "PROVIDE PANIC HARDWARE" 4) The treads in stair detail 4/A8.6 should be shown to be a minimum of 11 " of run. Section 1011 .5.2. Sheet A8.6 - Detail 4 shows the tread depth to be 11" minimum. 5) Handrails should be detailed on the plans in accordance with Section 1014.6. _3/5