Laserfiche WebLink
CITY OF EVERETT SPECIAL PROVISIONS <br /> The unit contract price for HDPE Pipe for Sanitary Sewer Force Main, 6-Inch Diam., shall <br /> constitute full compensation for all labor, materials, tools and equipment necessary to <br /> furnish and install the pipe, restrained joints (where shown on the Plans or as required by <br /> the Standard Specifications and Special Provisions), and all fittings, including tees, bends, <br /> crosses, reducers, couplings, and sleeves required for complete installation along the run, <br /> as shown on the Plans and specified herein, and additionally, shall include, but not be <br /> limited to, the following: <br /> 1. Removal of structures or obstructions not specifically covered under other bid items. <br /> This shall include, but not be limited to, removal and disposal of the existing asphalt or <br /> concrete pavement, sidewalk, curb, thrust blocks, miscellaneous landscaping, and sod <br /> as indicated on the Plans. <br /> 2. All required potholing to verify locations of water service crossings and existing utilities. <br /> The costs for pot-holing and excavation required to determine exact depths and <br /> locations of other utilities shall be included with this Work with no direct compensation <br /> made. <br /> 3. Utility or light pole holding in conformance with the requirements of the applicable utility <br /> including, if necessary, arranging for the utility to hold poles and paying the associated <br /> fees. <br /> 4. Trench excavation, hauling of unsuitable material, dewatering, and installation of pipe. <br /> No extra payment shall be made for removing, loading, hauling, and disposing of <br /> displaced and unsuitable material. <br /> 5. Maintenance, restoration and/or relocation, if required, of existing culverts, storm <br /> drainage pipe, other utilities and structures affected by construction that are to remain. <br /> 6. Temporary and permanent thrust blocking and dead man blocks, and temporary and <br /> permanent restraint systems. <br /> 7. Ethafoam pads or sand backfill between force main and other pipes. <br /> 8. Pressure testing of all force mains and shall include providing temporary connections, <br /> plugs, valves, fittings, and other such appurtenances to test the force main in <br /> accordance with these specifications. <br /> 9. Extra depth, including excavation, backfill and compaction required to clear known <br /> buried utilities or other known obstacles. <br /> 11. Work required to avoid unexpected or unforeseen obstacles shall be paid for under the <br /> Force Account item (Bid Item #23). <br /> 12. Restoring pavement markings disturbed as a result of force main and related <br /> construction. <br /> Bid Item 12 - Air ReleaseNacuum Relief Valve Assembly <br /> Measurement and Payment: Unit Price per Each (EA) <br /> The unit contract price for Air Release/Vacuum Relief Valve Assembly, shall constitute full <br /> compensation for all labor, materials, tools and equipment necessary to install an air <br /> release/vacuum relief valve system in a vault with a drain in accordance with the Contract <br /> Plans. Work includes the furnishment and installation of a vault, hatch with appurtenances, <br /> hatch drain, ladder with safety post, cementitious waterproofing, fittings and stainless steel <br /> piping from the force main to the vault, trench and vault excavation, backfill, and <br /> compaction; vault foundation material, internal piping and anchoring/support within the <br /> vault, floor drain and p-trap, side sewer and connection to existing manhole including core <br /> drill, testing, restoration including seeding or sodding or gravel to match existing surface, <br /> and dewatering. Pavement restoration and imported fill materials, other than foundation <br /> material per plan details, to be included in other bid items. <br /> Bid Item 13 - Drain Assembly <br /> Measurement and Payment: Unit Price per Each (EA). <br /> Shore Avenue Force Main Division B—BID DESCRIPTIONS February 24, 2022 <br /> WO No.—UP3734 SP-18 <br />