Always Active Services LLC of Seattle 7/21/2022

I 1 B) Service Connections: The Contractor shall obtain a City of Everett 2 Electrical Permit from the Contracting Agency at no cost. Coordinate I 3 with the Engineer a minimum of 30 days prior to connection for all 4 Electrical Permits. When the service is ready to be hooked up, the 5 Contractor shall contact the Engineer to request an electrical 6 inspection. After the service has been approved for hook up, the City 7 shall contact the Snohomish County PUD and they will make the 8 service connections to the power supply at a cost to be paid by the 9 City. The Contractor shall notify the PUD of the work schedule as 10 soon as possible so their work can be coordinated with the 11 Contractor's work. 12 1 13 CNH 8-20.3(13)C(9-29.10) LUMINAIRES.RTF 14 8-20.3(13) Illumination Systems 15 111 16 Luminaires 17 Section 8-20.3(13)C is supplemented with the following: 18 I 19 Unless otherwise noted, luminaires in the project will be furnished and installed by the 20 Contractor. 21 22 Street Luminaires (LED) 23 24 Street Luminaires shall be an integral unit with the specified optical performance, and 25 mechanical features that facilitate installation and maintenance. The fixture shall have a full 26 size terminal block and quick electrical disconnects to assure easy installation, leveling, and 27 maintenance access. A flush house-side shield plate shall be factory supplied and installed if 28 required by the plans. 29 30 The housing shall be cast aluminum with a universal 4 bolt slipfitter for a two inch nominal 31 mounting tenon. The unit shall have cooling fins to make for a long-life, efficient LED unit. 32 Electrical components shall be accessible without tools and mounted on or behind a 33 removable power door. The power door shall feature quick electrical disconnects to the 34 terminal board and LED board. The luminaire shall be provided with a ANSI seven pin (PCR7) 35 photocell receptacle. 36 37 Each luminaire shall be provided with a long life photocell compatible with the seven pin 38 (PCR7) receptacle. The following photocells are pre-approved for use: 39 40 Ripley Lighting Controls Long Life II 6390LL-BK-2.8 41 Sun-Tech TRS-2-8190 42 Dark to Light DLL Elite 127-2.8 IR 43 44 The LED nominal correlated color temperature shall be 4000°K +/- 200°K with a CRI >_ 70. 45 The light emitting diodes shall be high flux, high power white LED producing a minimum of 46 90% of initial intensity at 70,000 hours of life. The LEDs shall provide a copy of their test 47 documentation to the Engineer for the IES LM-80 testing procedure. The LEDs shall be 48 mercury and lead free. Nominal lumen efficacy shall exceed 108 lumens/W. 49 INTERURBAN TRAIL TO YMCA PEDESTRIAN IMPROVEMENTS SPECIAL PROVISIONS WORK ORDER 3749 Page SP60 of SP68 MAY 2,2022 I