Laserfiche WebLink
City of Everett 26 05 53 -2 <br /> Inductive Charqinq Infrastructure for Everett Transit <br /> C. Self-Adhesive Wraparound Labels: Preprinted, 3 mils thick, vinyl flexible label with <br /> acrylic pressure-sensitive adhesive. <br /> 1. Self-Lamination: Clear; UV-, weather-, and chemical-resistant; self-laminating, <br /> with protective shield over legend. Size labels such that clear shield overlaps <br /> entire printed legend. <br /> 2. Marker for Labels: <br /> a. Permanent, waterproof, black ink marker recommended by tag <br /> manufacturer. <br /> b. Machine-printed, permanent, waterproof, black ink recommended by printer <br /> manufacturer. <br /> D. Self-Adhesive Labels: Vinyl, thermal, transfer-printed, 3 mils thick, multicolor, weather- <br /> and UV-resistant, pressure-sensitive adhesive labels, configured for intended use and <br /> location. <br /> 1. Minimum Nominal Size: <br /> a. 1-1/2 by 6 inches for raceway and conductors. <br /> b. 3-1/2 by 5 inches for equipment. <br /> c. As required by authorities having jurisdiction. <br /> 2.2 EXTRUDED INSULATING TUBING <br /> A. Performance Criteria: <br /> 1. Regulatory Requirements: Listed and labeled in accordance with NFPA 70, by <br /> qualified electrical testing laboratory recognized by authorities having jurisdiction, <br /> and marked for intended location and application. <br /> B. Heat-Shrink Preprinted Tubes: Flame-retardant polyolefin tubes with machine-printed <br /> identification labels, sized to suit diameter and shrunk to fit firmly. Full shrink recovery <br /> occurs at maximum of 200 deg F. <br /> 2.3 TAPES AND STENCILS <br /> A. Marker Tapes: Vinyl or vinyl-cloth, self-adhesive wraparound type, with circuit <br /> identification legend machine printed by thermal transfer or equivalent process. <br /> B. Self-Adhesive Vinyl Tape: Colored, heavy duty, waterproof, fade resistant; not less <br /> than 3 mils thick by 1 to 2 inches wide; compounded for outdoor use. <br /> C. Underground-Line Warning Tape: <br /> 1. Tape: <br /> a. Recommended by manufacturer for method of installation and suitable to <br /> identify and locate underground electrical lines. <br /> b. Printing on tape must be permanent and may not be damaged by burial <br /> operations. <br /> 26 05 53 -2 IDENTIFICATION FOR ELECTRICAL SYSTEMS <br />