3003 W CASINO RD BASE FILE 2023-10-24

CAB1 -), Single Row Enclosure Model CAB 1, the smallest of the Cerberus PRO Modular system enclosures, can house a single Model CAB -MP cabinet mounting plate for mounting card cages; power supplies, and bulk amplifiers. Model CAB1 also has four (4) mounting slots on the inner door for mounting the Cerberus PRO Modular Operator Interface and Model ID - MP switch module brackets. Model CAB1 comes complete with a black back box, black inner and outer doors; a single lock and key set on the outer door, a single, installed cabinet mounting plate (Model CAB -MP), and a single, installed outer door lens plate (Model OD - LP). A red version (Model CAB1-R) is also available. Approximate size: 27" (68.6cm.) high; 26" (66cm.) wide, and 8" (20.3cm.) deep CAB2 -+Two-Row Enclosure The Two -Row Enclosure (Model CAB2) is the mid -sized Cerberus PRO Modular system enclosure capable of housing up to two (2) Model CAB -MP cabinet mounting plates. The inner door has two (2) rows of four (4) mounting slots. The outer door has space for mounting two (2) outer door plates (Models OD -LP, OD -BP or OD -GP), and can be configured to open from either side. Model CAB2 consists of the black Model CAB2-BB back box, the Model CAB2-BD black inner and outer door package, and one (1) Model OD -LP lens plate. The outer door has a single lock and key set installed. A red version (Model CAB2R) is also available, and a CAB2-RB back box is used with Model CAB2R. Approximate size: 45" (1 14.3cm.) high, 26" (66cm.) wide, and 8" (20.3cm.) deep CA133 -> Three -Row Enclosure Model CAB3, the largest Cerberus PRO Modular system enclosure available, can house a maximum three (3) Model CAB - MP cabinet mounting plates in the enclosure, and three (3) rows of inner - door mounting slots. The outer door can be configured to open from either side. Model CAB3 consists of the Model CAB3-BB back box, the Model CAB3-BD black inner and outer door package, and one (1) Model OD -LP lens plate. The outer door has two (2) locks and key sets installed. A red version (Model CAB3R) is also available. Approximate size: 63" (160cm.) high, 26" (66.4cm.) wide, and 8" (20.3cm.) deep REMBOX -+ Remote System Enclosures Models REMBOX2 and REMBOX4 are Cerberus PRO Modular system enclosures that are used for remotely mounting inner - door modules, which include: the Cerberus PRO Modular Operator Interface and switch -control modules (Model SCM series). Models REMBOX2 and REMBOX4 are thinner than regular Model CAB -series of enclosures -just 5" (12.7cm.) deep overall, and are perfect for mounting in limited - space areas (e.g. - office -complex lobbies or behind a receptionist's desk). No card cages, power supplies or bulk amplifiers can be mounted in a given Model REMBOX-series enclosure due to their smaller depth. However, the Cerberus Modular Operator Interface and some modules (e.g. - the remote network interface module [Model RNI]; the output control module [Model OCM-161, and the supervised input module [Model SIM-16]) can be mounted in a given Model REMBOX-series enclosure. Due to the depth of Models LVM and FMT, no Model OCM-16 or Model SIM-16 modules can be used simultaneously with Model LVM or Model FMT. Model REMBOX2 and Model REMBOX4 are designed for flush mounting with no trim kit required. Both enclosures also come with a clear lens plate on the cover. REMBOX2 -), Two -Module Remote Enclosures Model REMBOX2 has two (2) inner -door module spaces, and can hold a single Cerberus PRO Modular Operator Interface, as well as up to two (2) switch -module brackets. Model REMBOX2 can also mount a single RNI remote network interface on a bracket included in the backbox. A bracket, known as Model REMBOX2- MP, can be used to mount up to four (4) Model OCM-16 output control modules or SIM-16 supervised input modules. A Model REMBOX2-MP must be purchased separately. Approximate size: 18-112" (47cm.) high; 14-112- (36.8cm.) wide, & 5" (12.7cm.) deep REMBOX4 ->Four-Module Remote Enclosures Model REMBOX4 has space for mounting four (4) inner -door modules. Any combination of an operator interface (two -module spaces); switch module brackets; Model LVM, or Model FMT (one -module space each) can be used. Unused module spaces can be covered with Model ID-SP blank plates. Model REMBOX4 can also mount a single, remote network interface (Model RNI) on a bracket included in the backbox. A separately orderable bracket known as Model REMBOX4-MP can be used to mount up to eight (8) output control modules (Model OCM- 16) or supervised input modules (SIM-16). Approximate size: 24" (61 cm.) wide, 18-112"(47cm.) high and 5" (12.7cm.) deep Siemens Building Technologies Division -6- usa.siemens.comlcerberus-pro-modular