Laserfiche WebLink
Inspection and Monitoring <br /> • All BMPs shall be inspected, maintained, and repaired as needed to assure continued <br /> performance of their intended function. Site inspections shall be conducted by a person who is <br /> knowledgeable in the principles and practices of erosion and sediment control.This person has <br /> the necessary skills to: <br /> o Assess the site conditions and construction activities that could impact quality of <br /> stormwater,and <br /> o Assess the effectiveness of erosion and sediment control measures used to control the <br /> quality of stormwater discharges. <br /> • A Certified Erosion and Sediment Control Lead shall be on-site or on-call at all times. <br /> • Whenever inspection and/or monitoring reveals that the BMPS identified in this C-SWPPP are <br /> inadequate, due to the actual discharge of/or potential to discharge a significant amount of any <br /> pollutant, appropriate BMPS or design changes shall be implemented as soon as possible. <br /> Maintaining an Updated Construction SWPPP <br /> • This C-SWPPP shall be retained on-site or within reasonable access to the site. <br /> • This C-SWPPP shall be modified whenever there is a change in design, construction, operation, <br /> or maintenance at the construction site that has, or could have, a significant effect on the <br /> discharge of pollutants to waters of the state. <br /> • The C-SWPPP shall be modified if, during inspections or investigations conducted by the <br /> owner/operator,or the applicable local or state regulator authority, it is determined that the C- <br /> SWPPP is ineffective in eliminating or significantly minimizing pollutants in stormwater <br /> discharges from the site. The C-SWPPP shall be modified as necessary to include additional or <br /> modified BMPS designed to correct problems identified. Revisions to the C-SWPPP shall be <br /> completed within seven (7)days following the inspection. <br /> 3.1.13 Element#13—Protect Low Impact Development BMPS <br /> • Control erosion and avoid introducing sediment from surrounding land uses onto permeable <br /> pavements. Do not allow muddy construction equipment on the base material or pavement. <br /> Do not allow sediment-laden runoff onto permeable pavements. <br /> • Pavements fouled with sediments or no longer passing an initial infiltration test must be cleaned <br /> using procedures from the local stormwater manual or the manufacturer's procedures. <br /> 15 <br />