2601 SUMMIT AVE BLDG F 2024-01-08

Ms. Dawn Bushnaq Bushnaq Studio Architecture + Design Plan Check Number: B2109-083, First Building Review February 2, 2022 29. Restrooms 304 and 305 are provided with latches and closers on the doors per the schedules on Sheets A620 and A621. The rooms do not appear to provide the required approach clearance of 54 inches per ICC A117.1-09 Figure 404.2.3.2(f). The design should be revised. See IBC Section 1101.2. 30. The use of the "ST/JC" Room 111 is not clear. The door does not appear to provided the required maneuvering clearance per ICC A117.1-09 Figure 404.2.3.2(a). The design should be revised, or clarification should be provided substantiating that the clearance does not apply. See IBC Sections 1101.2 and 1103.2.2. 31. The corridor at the bottom of Stair B in the Level 1 Plan on Sheet A201, between Doors 10OB-1 and 10013-2, appears to be part of the accessible route between the building and the exterior. Doors 10OB-1 and 10OB-2 should comply with ICC A117.1-09 Figures 404.2.3.2; Door 10013-1 requires a 12-inch interior clearance on the handle side due to the closer per the Hardware schedule on Sheet A621. 32. Door Type "C" on Sheet A621 should specify a maximum 43-inch height for the vision lite per ICC A117.1-09 Section 404.2.10. See IBC Section 1101.2. 33. The construction drawings should specify emergency communications features for the elevators per IBC Section 3001.2. Miscellaneous: 34. Laundry Rooms 133 and 205 on Sheets A201 and A202 should specify floor drains per UPC-18 Section 418.3 Item 2. 35. Kitchen Room 110 on Sheet A201 may require the installation of a grease trap. These documents have not been reviewed for the treatment of oil or grease that may enter the City of Everett sewer system. Contact Industrial Pretreatment at (425)257-8240 regarding pretreatment or grease removal requirements. The drawings should specify the requirement to install a grease trap(s) if required. See Everett Municipal Code Chapter 14.42. 36. Kitchen Room 110 and Room 302 on Sheets A201 and A203, respectively, include cooking appliances that will require hoods per the IMC. The "Commercial Kitchen" portion of the Deferred Submittal section on Sheet G001 should list these hoods. See IBC Section 107.3.4.1. 37. Sheet S101 lists additional structural deferred submittals. The Deferred Submittals section on Sheet G001 should include a reference to the structural drawings. See IBC section 107.2.1 and 107.3.4.1. (S 3200 Cedar Street Everett, WA 98201 © 425.257.8810 O 425.257.8857 fax everetteps@everettwa.gov eve rettwa.gov/perm its Page 6 of 10