Laserfiche WebLink
City of Everett 01 35 29 - 2 <br /> <br /> <br />01 35 29 - 2 HEALTH AND SAFETY <br /> <br />1.5 PLAN <br />A. The Contractor shall develop a Site Specific Health and Safety Plan addressing health <br />and safety management methods specific to the project. The Plan shall, at a minimum, <br />include: <br />1. The name of the individual at the jobsite responsible for implementation and <br />compliance with this Plan. <br />2. If work requires the use of Fall Restraint or Fall Arrest, a Fall Protection work plan <br />meeting the requirements set forth in WAC 296-155-24505 shall be included. <br />3. If applicable, the Plan shall include the name and qualifications of any electrical <br />safety observer to be provided by the Contractor. <br />4. Steps taken to provide Protection of the Public and City Employees. This includes <br />protection from falling objects. Indicated type of overhead safe guards and <br />protection to be installed and safeguards from equipment damage due to debris <br />(including nails) on the ground. <br />5. A description of tasks to be undertaken, and equipment mobilized for this project. <br />6. A list of all known and expected safety or health hazards, problems, and proposed <br />control mechanisms. <br />7. Material Safety Data Sheets (MSDS) of and procedures for using, disposing of, or <br />storing for all chemicals, products, or materials regulated by WAC 296-62 to be <br />used by the Contractor. <br />8. A list of personal protective equipment, monitoring devices, and hazard-specific <br />plans or permits as appropriate and required by State and Federal regulations. <br />9. A description of emergency response measures, equipment available for <br />emergency response to address accidents and releases of materials, including, <br />but not limited to, first aid, eye wash/showers, and fire extinguishing equipment, <br />and location of this equipment at the jobsite. <br />10. Emergency phone numbers contacts, and location of the nearest medical facility. <br />11. A monitoring and inspection plan and record keeping measures to ensure that <br />equipment and work practices comply with this Plan. <br />12. Personnel names, training and notification procedures as appropriate to ensure <br />that all jobsite personnel are familiar with the Plan elements. Include copies of <br />training certificates. <br />13. Procedures for safe storage and handling of flammable liquids, in accordance with <br />WAC 296-24-330. <br />14. If applicable the Contractor shall include procedures for safe storage and handling <br />of compressed gasses in accordance with WAC 296-24-295, Compressed Gas <br />General Requirement. <br />15. Other issues which the Contractor determines are appropriate and necessary to <br />protect worker safety and health. <br />16. This plan shall be posted and marked in a location on site that will be noticed upon <br />entry of work site. A fall protection plan must also be established and shall be <br />posted next to the Health and Safety Plan (Accident Prevention Program). These <br />postings are required to be protected from inclement weather and must be legible <br />during the extent of this contract. <br />1.6 HEALTH AND SAFETY REPRESENTATIVE <br />A. The Contractor shall designate a Health and Safety Representative who will oversee all <br />work taken place on the job site including work performed by subcontractors and