Laserfiche WebLink
V. Cold process adhesives and mastics shall be kept at approved application temperatures and <br /> properly mixed or stirred prior to use in accordance with the manufacturer's recommendations. <br /> W. Store and protect products in accordance with manufacturers' instructions. <br /> X. Store with seals and labels intact and legible. <br /> Y. Store sensitive products in weathertight, climate-controlled enclosures in an environment <br /> favorable to product. <br /> Z. For exterior storage of fabricated products, place on sloped supports above ground. <br /> AA. Protect products from damage or deterioration due to construction operations, weather, <br /> precipitation, humidity, temperature, sunlight and ultraviolet light, dirt, dust, and other <br /> contaminants. <br /> BB. Comply with manufacturer's warranty conditions, if any. <br /> CC. Do not store products directly on the ground. <br /> DD. Cover products subject to deterioration with impervious sheet covering. Provide ventilation to <br /> prevent condensation and degradation of products. <br /> EE. Prevent contact with material that may cause corrosion, discoloration, or staining. <br /> FF. Provide equipment and personnel to store products by methods to prevent soiling, <br /> disfigurement, or damage. <br /> GG.Arrange storage of products to permit access for inspection. Periodically inspect to verify <br /> products are undamaged and are maintained in acceptable condition. <br /> END OF SECTION 01 6000 <br /> SEA00511 / Prologis - SEA00511 01 6000 - 5 Product Requirements, <br /> - FY24- Everett 1 - Capital Equipment and Material Storage <br /> Roofing Project <br />