Laserfiche WebLink
7.4.2 Grounding <br /> Exposed non-current carrying parts of the equipment were verified <br /> to be effectively grounded in accordance with the applicable <br /> provisions of NEC°, Article 250. <br /> 7.4.3 Guarding of Live Parts <br /> All internal components are enclosed in a grounded, screw closed, <br /> metal enclosure, and are effectively guarded per NEC', Section <br /> 110.27. <br /> 7.4.4 Overcurrent Protection <br /> Overcurrent protection was provided by a 60 Amp NRTL breaker. <br /> Additional overcurrent protection was provided by devices as <br /> shown on the electrical diagrams. <br /> 7.4.5 Wiring <br /> All wiring was found to be UL listed or recognized type MTW/THHN <br /> or equivalent. <br /> 7.4.6 Equipment Discrepancies <br /> No discrepancies were observed during the evaluation of the <br /> equipment listed in Section 5.0. <br /> 7.5 New Maintenance Bay Cell 7 Gantry Sleds Upper <br /> 7.5.1 System Description <br /> The equipment inspected consists of New Maintenance Bay Cell 7 <br /> Gantry Sleds Upper manufactured by El. The equipment is rated at <br /> 480VAC, 3 Phase, 60HZ, 89 Amps, 10KA and is used to supply <br /> power to and move the upper gantry machines. The equipment is <br /> installed indoors in an ordinary (non-hazardous) location, and has <br /> been evaluated for use in this location only. <br /> 7.5.2 Grounding <br /> Exposed non-current carrying parts of the equipment were verified <br /> to be effectively grounded in accordance with the applicable <br /> provisions of NEC', Article 250. <br /> Reference No.: 1108546 Page 9 <br />