|
<br />Lenora Regional SW Facility Division P – Proposal Nov. 2025
<br />Work Order # UP3792 SP - lviii
<br />Category 2: For official use only / disclosure permissible by law.
<br />4. Temporary and permanent thrust blocking and dead man blocks, and temporary and permanent
<br />restraint systems.
<br />5. Ethafoam pads or sand backfill between these installations and any existing watermains or other
<br />pipes encountered.
<br />6. Maintenance of existing watermain and provisions for interim water service.
<br />7. Pressure and purity testing of all watermains and shall include providing temporary blow-offs,
<br />backflow prevention, air gap apparatus, flushing, and disinfecting as necessary for testing in
<br />accordance with 7-09.3(24) of these Special Provisions and COE Standard Drawing No. 526.
<br />8. Extra depth, including excavation, backfill and compaction required to clear known buried utilities
<br />or other known obstacles.
<br />9. Abandonment of existing watermains as shown on the Plans, including cutting, draining water
<br />and properly disposing, and plugging pipe at each end with a minimum of 2-feet of Commercial
<br />concrete or CDF. Include the concrete or CDF work with this work with no direct compensation
<br />being made. Abandon existing mains in place where possible. Include cost of removal, hauling,
<br />and disposal of existing main with these Bid items when abandoning in place is not possible.
<br />Include coordinating with City Utilities Department to operate existing valves and/or complete
<br />taps, and plugging where noted, to be abandoned and removing the lids and valve boxes.
<br />10. Work required to avoid unexpected or unforeseen obstacles shall be paid for under the Force
<br />Account item.
<br /> Gate Valve 8-IN
<br />Measurement and Payment: Each (EA)
<br />Measurements shall meet the requirements of 1-09.1. The unit contract price for Gate Valves, ___-Inch
<br />shall constitute full compensation for all labor, materials, tools and equipment necessary and incidental
<br />to furnish and install valves complete in place on the watermain, including but not limited to, dewatering;
<br />removal and disposal of existing curb and gutter, and sidewalk; excavation, removal, hauling, and
<br />disposal of excavated materials; furnishing, jointing, and installing valves and valve boxes with
<br />extensions if necessary; installing temporary concrete thrust blocks; restraint systems; painting; flushing
<br />and disinfecting; furnishing, installing, compacting, and testing bedding and backfill materials;
<br />constructing asphalt concrete pad around valve box if necessary; cleanup; and any additional work,
<br />materials, and equipment required to install the valves and assembly, except as included in other unit
<br />price bids..
<br /> Hydrant Assembly
<br />Measurement and Payment: Each (EA)
<br />Measurements shall meet the requirements of 1-09.1. The unit cost shall include the tools, labor,
<br />materials, and equipment to furnish and install fire hydrant assemblies, including the 6-inch DI hydrant
<br />pipe including the lateral from the main, auxiliary gate valve, shackles, bends, valve box (including
<br />final adjustment), restraints, concrete blocks, gravel, painting, and others required for the complete
<br />installation of the hydrant assembly as specified. All excavation, backfill, and compaction necessary
<br />to install the hydrant assembly shall be included in the unit contract price.
<br /> Water Service, 1 Inch – Reconnect Existing
<br />Measurement and Payment: Lump Sum (LS)
|