2128 BROADWAY 2016-01-01 MF Import

�.. � , <<;, ..,�. Plan Check No: B-36887 September 22, 1992 Page Two of Three 7.A floor or landing not more than 1/2" below the threshold is required on each side of a�i exit door. Section 3304(i). 8.Landings shall have a width not less than the width of the stairw�ry or the width of the door, whichever is greater. Section 3304(j). 9.The length of the landing measured in the direction of travel shall be not less than 44". Section 3304(j). 10.The north, south and east walls (see Item N2) are required to be rated. Please provide UL Test number or I.C.B.O. approval number for the proposed wall construction (Note: 5/S" GWB dces not necessanly provide one-hour fire protec�.ion for each layer applied. 'fhe entire wall assembl-y must be tested to achieve the required rat�,•�. Information on tested assemblies is p�blished UL, the Gypsum Association and other product manufacturers). 1 i.Please provide a complete plan of the existing shop building including welding and spraying areas, wall openings and "lean-to" shed on the north side of the building. Indicate distances to property lines and wall construction. 12.Provide ventilation of one cubic foot per minute per square foot of floor area and equip each engine repair station with an exhaust p�pe extension duct extending to the building extenor per Section 905(c). 13.The accessible parking stall must be a van accessible parkinR stall per Section 3107(a) and must be 96" wide with an adjacent access aisle not less than 96" wide. The parking stall must be adjacent to the accessible route of travel and the main building entrance. The accessiUle route of travel n:ust be 36" minimum width and must not slope over one inch in 48 inches. Please also illustrate the required accessible signage per Section 3107(c). In addition, provide signage located along Broadway indicating the location of the accessible parking and building entrances per Section 3103(b). I I I f