930 N BROADWAY 2018-01-01 MF Import

Meg Haley July 18. 207 7 Page 5 0110 Egress 1. The accessible means of egress for the �uilding should be noted on the drawings, per IBC section 1007.1. Response: See Code Summary — Occupant Needs, X- Chapter 10: Exits, E. AccessiWe Means of Exit (1007) o� reissued Sheet G002. 2. The elevator cab interior clear dimensions should be shown on the drawings such ihal the elevalor car shall be of such a size and arrangement to accommodate a 24-inch by 84-inch (610 mm by 1930 mm) ambuiance stretcher in the horizonlal, open position and shall be idF�tified by the internalional symboi for emergency medical services (star of life). The symbol shall not oe less than 3 inches (76 mm) high and sha!I be placed inside on both sides of the hoistway door frame, per EMC chapter 16.01, section V. Response: See Sheet A415 Elevator Plans and Sections. (The specifications also cover IBC Chapter 10 requirements.) 3. Landing depth and width should be dimensioned for all slairs on the drawings, per IBC section 1009.5. Response: See attached resubmitted drawings A412 for dimensions for stairs. 4. Where doors swing into the stainvell landing, the arc of the door swing on the minimum landing dimensions should be shown on the drawings not to reduce the required landing to less than one-half of lhe required width, per IBC sedion 10D9.5. Response: Dimensions for allowable landing reduction due to door swings are shown on Stair plan drewings A411 8 A412. (Note: Only landings that get reduced to less than the stair width are dimensioned. Others that exceed their stair width are obviously in compliance.) 5. Minimum tread dimansion of 11 inches and maximum riser dimension of 7 inches should be shown for all stairs on the drawings, per IBC section 1009.4.2. Response: Riser and tread dimension are shown on Sheet A411 8 A412. G. Handrail height and profile should be indicated on the drawings, per IDC section 1012.2 and 1012.3. Response: Handrail height is indicated on Sheets A411 & A412. 7. Handrail extensions should be shown on the drawings al lhe top and bottom of stairs and ramps, per IBC section 1012.6. Response: Handrail extensions are dimensions on Sheets A411 & A412. 6. Stair 1 requires a gate shown on the drawings at the second floor, per IBC section 1022.7. Directional exit signs should be sho�vn on lhe drawings. Response: The gate at Stair 1, second floor landing leading down to the 1s� floor is shown on Sheet A102 and 21A411.