3525 COLBY AVE 2018-01-02 MF Import

8. Lack of comment on the plans submitted with the application does not constitute approval ofthese plans. 9. City streets and alleys are to be kept clear of dirt and debris at all times during construction. Dust suppression_and street cleaning must occur as directed by the Public Works Inspector. 10. The existing gravel alleyway along this propeny's frontage must be paved per City standards including any necessary drainage system improvements. 11. A Performance Guarantee is required for alley improvements prior to any building pertnit being iss�ed. 12. A one year warranty is required for the alley and public drainage improvements in the amount of 10% of the cost to install the facilities. 13. As-builts of the public storm sewer Lvill be required to be submitted per City Design and Construction Standards and Specifications. 14. A permit is required for the destination of the fill. 15. Parking must be per City Zoning Code and City Uesign and Construction Standards and Specifications. 16. Placement and screening of refuse disposal areas must be provided per Section 39.080 of the Zoning Code. 17. Any rockeries or retaining walls proposed in required setback areas must be in conformance with Section 39.150 of the Zoning Code. 18. Rooftop mechanical equipment, including vents, must be screened per Section 39.040 of the Zoning Code. 19. Building setbacks must be a minimum of ten feet front yard and side yards and five feet rear yard for the R-5/C-O zone and no setback for the B-1 zone. Buildir.g height shall be a maximum of 80 feet for the R-5/C-O zone and 35 feet for the B-1 zone. All office buildings shall be located so the front building facade is located on the front yard setback line. No portion of the property located between the front lot line and the building shall be used for off-street parking. 20. Landscaping must be provided per Section 35 of the Zoning Code. At a minimum this must indude the following: I � I 1