5929 EVERGREEN WAY BASE FILE 2016-01-01 MF Import

an accessible location. A rapid entry system may also be desirable in order to avoid unnecessary damage while making entry to any building during an emergency situation. Please call 259-8726 for further information. 28. The City of Everett prohibits outdoor burning. Therefore, outdoor burning for the purpose of disposing of construction debris or rubbish will not be permitted. 29. Premise identification, fire hydrants and all required access roads must be in service prior to commencement of construction. 30. Fire safety practices during construction must be in compliance with the Uniform Fire Code, 1985 Edition, Article 87, "Fire Safety During Construction." 31. Trash Collection - Dumpsters over 1.5 cubic yards capacity shall be located a minimum of five feet from the building [UFC 1103.2.2, 1994 Edition]. 32. The Washington State Clean Air Act requires the use of all known, available, and reasonable means of controlling air pollution, including dust. Dust generated during construction activities can be controlled by wetting those dust sources such as areas of � exposed soils, washing truck wheels before they leave the site, and installing and maintaining gravel construction entrances. Construction vehicle track-out is also a major dust source. Any evidence of track-out can trigger violations and fines from the Department of Ecology or the Puget Sound Air Pollution Control Agency. 34. The proposal must also comply with all other City Code and Ordinance requirements not specifically set forth herein. G�NEitAL INFORMATION 1. The Police Department has the following security recommendations: a. Lighting of the parking lot should be a minimum of 3-4 foot candles. b. A monitored fire and intrusion alarm system zoned for each entity should be provided. To provide protection in case of armed robbery, include remote panic buttons and/or foot trip if using customer counter. c. If offices will be handling cash, an actual money safe shouid be installed (for next day receipts only). Seismic detectors and passive infrared alarm sensors should also be instaiied in the room. d. The perimeter doors should be solid core or metal with double cylinder dead- bolts installed. If doors open to the outside, or hinges are exposed, pin hinges should be provided. e. If store front glass doors are part of the project, they should have locking case bolts top and bottom. The door should have a maximum security dead-boit with 1 3/4"throw and 3/4" laminated steel. f. Metal security bay doors can be secured with 3!8" case-hardened steei hasps or chain and padlocks with 1/2" case-hardened steel shackies. � 2930 Wetmore, Suite 100, Everett,WA 98201 � (206) 259-8731, Fax (206) 259-8742 7