Laserfiche WebLink
PARKING - FIRE LANE - VIOLATORS MAY BE TOWED" to be located as <br />approved by the Fire Marshal. <br />18. The correct address must be posted at the street entry or on the <br />building near the main entry and must be clearly visible from <br />the street. <br />19. The City of Everett prohibits outdoor burning; therefore, <br />outdoor burning for the purpose of disposing of construction <br />debris or rubbish will not be permitted. <br />20. Fire hydrants and access roads must be in service prior to <br />commencement of construction and fire safety practices during <br />construction must be in compliance with Article 87 of the <br />Uniform Building Code. <br />21. Construction activities must be in compliance with Uniform Fire <br />Code, 1985 Edition, Article 87, "Fire Safety During <br />Construction." <br />22. The Fire Department may recommend or require a rapid entry <br />system, such as a key box, to be installed in an accessible <br />location. <br />23. The Police Department has the following security <br />recommendations: <br />a. Lighting of the parking lot should be a minimum of 1-2 foot <br />candles. <br />b. During the final stages of construction, please contact Dick <br />Thornberry, Crime Prevention officer at 259-0416 for further <br />security recommendations. <br />c. A monitored fire and intrusion alarm system zoned for each <br />entity should be provided. To provide protection in case of <br />armed robbery, include remote panic buttons and/or foot trip <br />if using customer counter. <br />d. If offices will be handling cash, an actual money safe <br />should be installed (for next day receipts only). Seismic <br />detectors and passive infrared alarm sensors should also be <br />installed in the room. <br />e. The perimeter doors should be solid core or metal with <br />double cylinder dead -bolts installed. in f doors h open to should the <br />he <br />outside, or hinges are exposed, p hinges <br />provided. <br />f. If store front glass doors are part of the project, they <br />should have lc-c%ing case bolts top and bottom. The door <br />should have a maximum security deadbolt with 1-3/4" throw <br />and 3/4" laminated steel. <br />P <br />