Ordinance 1849-92 - Laserfiche WebLink

4 . Mechanical equipment located on the roof, facade, or external portion of a building shall be architecturally screened by including the equipment in the building or site design so as not to be visible from adjacent properties or public streets. 5. Equipment or vents which generate noise or air emissions shall be located on the opposite side of the building from adjoining residentially zoned properties. is hereby amended to read: 1 . Prefabricated metal buildings and buildings with corrugated metal siding shall be prohibited. Exterior building finish for buildings located within three hundred ( 300) feet of residentially zoned properties shall be approved by the Planning Director, using Review Process II.A. 2. Buildings with exterior walls greater than sixty (60) feet in length shall be required to provide architectural modulation, in accordance with the following standards: a. Minimum modulation depth = 5 feet b. Minimum modulation length = 15 feet c. Maximum modulation length = 60 feet d. Minimum height of modulation = 50% of height of facade e. Any other method of architectural modulation which results in an equivalent or superior articulation of the building facade, and which gives the building the appearance of not having flat facade surfaces for substantial portions of its length, as approved by the Planning Director using Review Process II .A. 3 . Exterior building materials shall be selected so as not to project or reflect natural or artificial lighting or glare into residential areas. 4 . Mechanical equipment located on the roof , facade, or external portion of a building shall be architecturally screened by including the equipment in the building or site design so as not to be visible from adjacent properties or public streets. 5. Equipment or vents which generate noise or air emissions shall be located on the opposite side of the building from adjoining residentially zoned properties. SECTION 14: Section 27 . 020.0 of Ordinance No. 1671-89, which reads: C. Loading: Truck loading operations and maneuvering areas shall not be located within required building setback areas or within one-hundred thirty (130) feet of areas zoned for residential use. Truck loading/unloading shall not be permitted on streets. Truck loading, parking and maneuvering areas shall be screened from abutting properties and streets by a sight obscuring fence eight (8) feet in height, enclosed within a ten (10) foot wide landscaped area planted to Type II standards.