1714 EDGEMOOR LN 2017-06-12 - Laserfiche WebLink

r [13 Supports for solar modules are Installed to spread the dead load across as many roof- framing members as needed to ensure that no point load exceeds fifty(50)pounds, C ❑ JIRC M2302.2.1(5)) The photovoltaic modules and supporting structure shall be constructed of noncombustible materials or fire-retardant treated wood equivalent to that required for i� U the roof construction. (iRC M2302.2.1) Roof and wall penetrations shall be flashed and sealed to prevent entry of water, ❑ rodents,and insects.[IRC M2302.2.2] 14, PV modules are listed and labeled with a fire classification in accordance with UL 1703, El M2302,2.31 Comments; if you answered yes to all of the above questions,the project qualifies for the over-the- counter permitting process. Determine if your project qualifies for an Over-the-Counter electrical permit Yes No N/A 1. PV modules,inverters,and combiner boxes are identified for use In PV systems, ® C7 2. The Inverters are listed and labeled in accordance with UL 1741 and are listed for utility Interaction. (IRC M2302.41 3. The AC Interconnection point Is on the load side of service disconnect. [NEC 690,64(8)] ❑ 4. The system meets all current NEC,City and Washington Cities Electrical Code requirements. 5. For Split-Buss modules the AC Interconnection must be one of the six service ❑ disconnects. 6. Maximum load added to the panelboard Is based on the rating of the panelboards bus/main OCPD combination In accordance with NEC 705.12(D)(2)(3)(b),and Is limited to(check combination that applies): ❑225 amp bus/200 amp main OCPD-13,440 AC watts,maximum 70 amp inverter OCPD. ❑225 amp bus/225 amp main OCPD- 8,640 AC watts,maximum 45 amp Inverter OCPD. 6200 amp bus/200 amp main OCPD- 7,860 AC watts,maximum 40 amp Inverter OCPD. 0150 amp bus/150 amp main OCPD- 5,760 AC watts,maximum 30 amp Inverter OCPD, 0125 amp bus/125 amp main OCPD- 4,800 AC watts,maximum 25 anip inverter OCPD. 1.7125 amp bus/100 amp main OCPD- 9,600 AC watts,maximum 50 amp Inverter OCPD.