2927 WETMORE AVE 2018-02-12 - Laserfiche WebLink

• • PIERCE DESIGN 3. If the intent is to change the occupancy shown on the drawings to a B occupancy per IBC section 303.1.1, then a posted occupancy sign with a maximum 49 persons should be shown on the drawings and posted in a visible location near the front door, per IBC section 1004.3. / Response: The intent is to remain a B occupancy per 303.1.1, small building and tenant spaces.A posted v occupancy sign requirement has been noted on the plans near the main exit, and noted in detail in the floor plan notes, see Sheet A2.0. a) The code analysis on the drawings should be revised to show a maximum of 49 persons instead of 65. Response: The code analysis on Sheet A0.0 has been revised to show compliance with the IBC section 303.1.1. The floor plans on Sheet A2.0 have been updated to reflect revised occupancy calculations. 4. The drawings should indicate specific signage at the main entrance door and the rear exit door to indicate that these doors will be open during business hours,per IBC section 1010.1.9.3, 2.2. Response: The existing Floor Plan Note has been updated and clarified to indicate that the doors are to remain unlocked when the space is occupied, per IBC 1010.1.9.3, 2.2. Doors 1 &2,front and rear have added notes to refer to the plan notes for specifics. Construction 1. Please provide details of the new ceiling in the prep area. The ceiling details should be shown on the drawings, and in section should show a 2 inch angle at the wall, per the Northwest Ceiling Bureau details on document 401. Response: Prep area and hallway ceilings are targeted on Sheet A3.0, #4 and described in detail on Sheet A7.1 under Wall, Floor, Ceiling type schedules. 2. Safety glazing should be shown on all door and window elevations as required by IBC section 2406.4. Response: Safety glazing for doors and windows is now properly shown on Sheet A3.0, Elevations, specifically Window#2, per 2406.4.2, Glazing Adjacent to Doors. Door and Window schedule on Sheet A7.1 also reflects this information. 3. Please indicate wall and ceiling sections for the new walls, and target those sections to the plans. This information should show if the walls are floor to underside of structure, or a different configuration. Response: Wall and ceiling sections are shown on Sheet A7.1, Wall, Floor, Ceiling Type Schedules.Additional clarification has been noted on Detail 1 Wall Section, Sheet A3.0 and the floor plan, Sheet A2.O. New prep area and hall have ceiling lids to match existing bathrooms.Thin wall behind bar is partial height for tile application, height noted on Sheet A2.0. 4. Please confirm if doors 3, 4, and 5 are existing or new doors. Response: Doors 3&4 are existing doors, Door 5 is new, and have been noted as such in the Door Schedule under Remarks. Door 5 has also been noted as new on the main level floor plan, Sheet A2.0. 5. Please indicate safety glazing on the schedules for door 1 and window 2. Response: Schedules for door 1 and window 2 have added notes indicating safety glazing per 2406.4.1 and 2406.4.2, respectively. CORRECTIONS RESPONSE LETTER PAGE 2 of 4 Pierce Design 2300 W Commodore Way Suite 201 Seattle,WA 98199 T 206-792-9396 E-mail wes@wespierce.com