American Process Group Inc 7/9/2019

City of Everett 01 2213 - 2 2019 Biosolids Removal UT3705-2 a. For the purposes of this Contract the Contractor shall be paid the unit price bid for Dry Tons per the amount (by weight) of solids material that is weighed and transported to the designated location on the City's Biosolids Pad. For this contract, the measurement of a Dry Ton includes the weight of only the solid material contained in each ton of material that crosses the City owned scale —the weight of the water will not be included. b. Contractor shall weigh biosolids by the truckload, using the certified scale provided by Owner. c. The calculation of a Dry Ton for payment shall be as per the following equation: (Tons of material loaded into a truck) x (Percent TS) 100 = Dry Tons Example 1 (Material at 28% TS): 2 tons of material loaded into a truck x (28%) 100 = 0.56 tons of Dry Ton material for payment. Example 2 (Material at 32% TS): I 10 tons of material loaded into a truck x (31%) 100 = 3.1 tons of Dry Ton material for payment. d. Payment , 1) All labor, equipment, materials and necessary appurtenances required to dredge the biosolids from the pond and necessary to dewater these biosolids to a solids content of equal to or greater than 28% TS shall be incidental to the payment for each Dry Ton. 2) Payment for labor, equipment, and materials necessary for loading, , weighing, transporting and depositing the material in the designated area on the City's Biosolids Pad shall also be incidental to the payment for each Dry Ton. 3) Once a load of material is determined to meet the 28% requirement, , per the testing of the samples provided to the City, the City will pay for the amount of Dry Ton material in that load based on the formula shown above C.2.c. See also Section 01 4523 for sampling requirements. 1 PART 2 - PRODUCTS (Not Used) 1 01 2213 - 2 UNIT PRICE MEASUREMENT